Abstract
The objective of this work is to understand the use of pulsed current and enhance the operational performance of wet welding with coated electrodes. Underwater Shielded Metal Arc Welding remains the predominant technique for repairing submerged structures due to its reasonable cost, adequate weld metal quality and ease of operation. Nevertheless, it is essential to study its operational characteristics to mitigate inherent problems such as arc instability and electrode melting variations. In this sense, the study includes performing bead-on-plate welds using a welding power source that allows electronic control of the current, applying pulsed wave modulation while maintaining the same average current. Experiments were conducted at depths of 0.3 m and 30 m, in both direct and reverse polarity. The results indicate that the melting rate increases at higher current amplitude level due to a higher Root-Mean-Square current. Furthermore, a greater Joule effect was obtained at lower pulse frequency level, at both current amplitude levels, regardless of polarity or operating depth. The constriction of the arc caused by hydrostatic pressure was found to require a higher current density, which becomes insufficient during base current periods, making arc maintenance more challenging. Therefore, increasing the pulse frequency proved to be an effective strategy for mitigating instability at low base currents. In addition, a positive correlation was identified between melting rate and arc voltage, indicating that an increase in arc length is associated with instantaneous melting of the electrode tip. These findings indicate that pulsed current has significant potential for implementation in underwater environments, particularly in controlling arc voltage in shallow water depth. Future research should explore its feasibility at greater depths, integrating additional process parameters. Moreover, the statistical approach, based on multiple linear regression, showed a strong fit with the experimental data, confirming that predictive models can be applied to optimize the operational performance of wet welding.
Keywords: Underwater Shielded Metal Arc Welding, Pulsed Current, Melting rate, Arc stability improvement.
Referência:
GONZALEZ, O. M. C.; URIBE, A. M. M.; ARIAS, A. R.; SILVA, R. H. G.; QUINTANA, D. S.; LOBO, E. J. S.. Operational performance enhancement in underwater shielded metal arc welding via pulsed current. 28th ABCM International Congress of Mechanical Engineering (COBEM), November 9-14, 2025. Curitiba, PR, Brazil. doi://10.26678/ABCM.COBEM2025.COB2025-2724